Skip to main content

Week 5: Presentation

This week was all about getting ready for presentation and showing our defined project objectives as a team and individually. one of my responsibilities includes CAD design for the mechanism to harness current. Additionally, we are also working on the supercapacitor calculations. Also, we had numerous conference calls with Maxwell representatives to educate ourselves with the supercapacitors capabilities, performance, and conditions.
From the presentations, there were numerous assumptions and conditions explained that our team needs to consider.
First, the bogie- integration team has proposed to design a new bogie design
second, the high-density motors team will get their motor sometime October.

Comments

Post a Comment

Popular posts from this blog

WEEK 12: 3D printing for Prototype

This week is spent 3D printing all the parts for the prototype. The CAD is coming along however  3D printing takes longer because we depend Makerspace availability. This is the 3D printed part that will be attached to the body of the slave.  The plans is to secured, fixed (bolted) one side on the torsion spring (the outside) and  apply a force on middle legs. this will counteract  the force applied and create the 50N we expect. It was important to design a housing for the spring so we can attached to the spring and to legs. We are making iterations as we continue receive all printed parts. One important factor was how to hold on to the leg.  the next figures show the the changes.  These two figures are parts of the mechanism that will house the legs on the middle section. as we continue with these models we realized many iterations that have to made and  prototyping provide the opportunity to see that. the two figure will replace...
Post a Comment
Read more

Week 5 (February 6,2019):Latest current pick up mechanism and current rail design

For the past week, the team have modified the current rail and the current pick up mechanism. The figure above represent last year design. the figure above is the latest design The figure on the right is the mechanism that will make contact with the electric current rail. the legs (L-shaped) are design to fit the the width of the overall Guideway track. 
Post a Comment
Read more

WEEK 6: CAD drawing submitted for fabrication

The week after presentation, helped me to address very important details regarding the current insulator and rail. Also, it helped few modification on the current pick up mechanism to pivot about a joint. I have addressed those details as shown in the figure below. Using SolidWorks, I was able to calculate the tolerance angle as the current pick up mechanism is raised for a maximum on 1 in. a 10 degree angle will be used on the top pivot point.  Additionally, I have sent the final drawing to Turpo Manufacturing company for fabrication. They will be machining some on the parts on this mechanism in exchange of advertising. finally I'll be working on the unistrust channels which will hold our current rail.
Post a Comment
Read more